We have been waiting for some time to begin work on the Ken Burton trail. This much-loved trail was built by the Mount Wilson Bicycling Association in the early 90s, creating a loopable route with Brown Mountain and the Gabrielino Trail. CORBA used a generous grant of $10,000 from REI to help fund the restoration of the Gabrielino Trail from Paul Little to Oakwilde Campground. We coordinated with the Los Angeles Conservation Corps who continue to work on the segment north of Oakwilde this fall.
CORBA and MWBA have been given permission to work on Ken Burton, and to connect it to the restored section of the Gabrielino. Once completed, we’ll be asking the Forest Service to open the Brown, Ken Burton, Gabrilieno loop route to the public.
We have scheduled a work weekend on the 7th/8th of November. Logistics require us to haul in tools and equipment by Bob Trailer. Most of the two days of work will entail cutting back brush. Surprisingly, much of the tread is in good condition, and most of the switchbacks appear to be generally intact. This says a lot about the quality of construction by the MWBA’s pioneers and their dedication to quality trail building. Only a few wire baskets have failed out of the many that were used.
Please RSVP for the trailwork on our meetup group at http://meetup.com/corbamtb or on the MWBA Facebook page.
IMPORTANT:
When: Meet Saturday, November 7, 2015, 7:30.a.m. Windsor and Ventura parking lot. Ride up to
the top of upper Brown Mountain fire road starting at 8, and meet there at 9:15. We’ll work until about 1 p.m before riding back down.
Sunday, November 8, 2015, meet at 7:45 a.m. at Windsor and Ventura Parking lot. Ride up at 8 a.m..
You may come out for either or both days.
What to bring:
Eye protection (cycling style sunglasses are fine), work gloves (if you have them), sunscreen, water and trail food, sturdy shoes. You are required to wear long pants and long sleeves, though these can be packed for the ride up and changed into at the top. We’ll be supplying forest-service required hard-hats, gloves and tools. A GMRS radio could also be helpful.
What to expect:
Experienced trail crew members will be using power tools (hedge trimmers, etc) to clear brush; others will clear the cuttings from the trail and do minor tread work. You’ll need to sign a waiver for CORBA, and a Job Hazard Analysis for the Forest Service. If under 18, be accompanied by a parent or guardian, at least to sign the waiver before we start, and assign a guardian who will be with us. People should be familiar with the ride up and the location. Those hauling trailers are welcome to take off early, and they can be briefed on safety at the top.
The ride in will be about 7 miles with 2000′ of elevation gain on a mix of fire road, double track and singletrack. Expect to ride all the way up, though there’s a few possible hike-a-bikes. We expect everyone to be at the upper Ken Burton trailhead by 9:15 and ready to hike down the trail and begin work.
We’ll be clearing brush, removing vegetation growing on the tread or leaning over the trail corridor, approximately 4 – 5 feet either side of the center of the tread. There will be some tread repair in a few places where the trail bench cut has been filled with slough, and some light tread grooming over other areas. We’ll break at about 11, take an assessment of how everyone feels and see who wants to continue. We hope to finish work about 1, and be heading back to our bikes for the descent back to the bottom.
Afterwards, those who wish may join us for lunch at a location to be announced.
Those hauling bob trailers should understand what an extra 50 pounds feels like on a ride like this, and have something left over to do trailwork. If you’re interested in hauling a trailer (a smaller chainring is helpful) post in the comments or contact Steve [at] corbamtb.com.
Severe weather cancels the event, including heavy rain, high fire danger and/or high wind, or other circumstances. Check CORBA’s pages on either Meetup or Facebook before you head out just to make sure that we’re still on. November 15 will be a backup day in case of weather cancellation.
We hope to see you there showing how much you love and miss our trails and that mountain bikers are one of the most active stewards of the trails.
Tags: brown mountain, Ken Burton, trailwork
Is there more Ken Burton trail work planned for the weekend of Nov 14/15?
– Markus
The 15th was a backup day in case of bad weather this past weekend. If there’s enough interest, I’d be happy to head up on the 15th with a small crew and continue, but our next official day is November 22nd. You can go to the facebook event page at https://www.facebook.com/events/581897245290754/, or watch CORBA’s meetup group for an announcement tonight or tomorrow. Following that we are tentatively scheduled for December 12th.
Steve